Range: from 820 MHz to 1020 MHz, Power: 200 watts Suppression range: up to 900 m Working temperature: from minus 40 °C to 50 °C
Anti-UAV and FPV (control ranges) and other means of communication. Means for the protection of armored and lightly armored vehicles and personnel in advanced positions.
General characteristics
Range:
Three-channel interference transmitter in the range from 820 MHz to 1020 MHz, 2.4 GHz and 5.8 GHz (optionally, it is possible to install additional interference channels, depending on the tasks, in the range from 200 MHz to 6000 MHz)
Power:
The total output power of the noise signal is at least 150 Watts (optionally, it can be increased to 300 Watts and equipped with additional interference channels).
Corps:
aluminum with passive and active cooling,
Antennas:
with two types of antennas (pin type "Omni" and flat omnidirectional for more compact placement - in-house production).
Battery:
of own production in the form of a charging hub (charging station), +29.4V with a capacity of 60Ah with the option of increasing the capacity to 120Ah.
Charger:
input voltage 110-240V, output voltage +29.4V with a power of 20Ah.
Cable:
to supply power from the battery to the device. 730 MHz -1020 MHz with an output power of 150 Watts.
Suppression range:
TBS CRSF – 150m, ELRS 915MHz – 70m, TBS CRSF 868MHz – 160m, ELRS 740MHz – 150m, 2.4GHz – 250m, 5.8GHz – 250m in the case of dome omnidirectional antennas. TBS CRSF - 890m, ELRS 915MHz - 750m, TBS CRSF 868MHz - 900m, ELRS 740MHz - 900m, , 2.4GHz - 250m, 5.8GHz - 230m with directional antennas.
Additionally:
If necessary, it is equipped with a TinySaUltra spectrum analyzer for detecting UAVs in a wide spectrum from 10 MHz to 6000 MHz.
Uptime:
operation from a 60Ah accumulator for an average of 210 minutes, depending on the environment and weather conditions.
Dimensions and weight:
318×189.5×54mm Weight 4.6kg (including dome antennas).
Operation:
1 person is required for maintenance and operation
External factors:
The product retains its operational characteristics and resistance to external factors, which are presented to products of group 1.14 of UHL performance according to GOST B 20.39.304 (with the exception of lower temperatures during operation of the accumulator):
Working temperature:
from minus 40 °C to 50 °C The limit is from minus 50 °C to 60 °C